Monday, September 13, 2010

Cambridge Audio Azur 650R

Cambridge Audio A/V Receiver - Azur 650R

Product Description

HDMI Switching 1.3c, 3 inputs 1 output Analogue video up-conversion transcode any analogue format upwards to the other analogue formats and to HDMI HDTV capable via component video or HDMI/DVI Decoding formats: LPCM, Dolby Digital / Dolby Digital EX, DTS / DTS ES Matrix/Discrete, PLII/PLIIx, DTS Neo:6, Dolby True HD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD High Resolution Audio, Multi-channel PCM. All in 5.1/6.1 or 7.1 variants 32-bit DSPs, 24/192 capable DACS Post processed Dolby / DTS modes (convert 5.1 to 7.1) Post process 5.1 or 6.1 formats with PLIIX or Neo:6 to 7.1 On-Screen Display (OSD) Available via composite video, S-video, component video and HDMI Separate stereo DAC for left/right from surround channel codec Audio Inputs: 8 line analogue, tuner (FM/AM), 7.1 analogue input, 5 digital coaxial, 6 digital optical Video Inputs: 5 composite, 5 s-video, 3 component video, 3 HDMI Audio Outputs: 7 amplified speaker outputs, 7.1 preamp outputs Video Outputs: 1 composite, 1 s-video, 1 component video, 1 HDMI Recording Audio outputs: 2 line level analogue, 2 digital coaxial, 2 digital optical Recording Video Outputs: 1 composite, 1 s-video Other Connections 1 1/4" / 6.35mm headphone output, Control bus input/output, 1 IR emitter In, 1 RS232C, 1 IEC type mains inlet Incognito Ready ™ 2 Incognito keypad outputs (2nd/3rd Zone), 3 IR emitter outputs, 2 composite video outputs (2nd/3rd Zone), 1 external power supply input 24VDC Audio split mode Watch and listen to different sources Bi-amp mode Bi-amplify front left/right speakers when in a 5.1 set-up Full function aluminium face Azur Navigator remote Audio: Power Output: 7 x 100 watts rms per channel, 8 ohms (all 7 channels driven) 2 x 120 watts rms per channel, 8 ohms (two channels driven) THD: <0.006%>90dB ‘A’ weighted Audio input impedance/sensitivity 47kOhms/175mV or greater Digital input impedance: 75ohms (coaxial/SPDIF) Tone Controls: Bass +/-10dB @ 100Hz Treble +/-10dB @ 10Hz Tuner: FM mode / RDS 87.5-108MHz, 75 ohm coaxial aerial AM mode 522-1629Hz, 300 ohm loop aerial General Quiescent power consumption: <70w Standby Power Consumption: <1W Max. Power Consumption: 1400w Dimensions (H x W x D): 150 (inc feet) x 430 x 420 (inc volume knob and speaker terminals) mm (5.9 x 16.9 x 16.5 inches).

http://www.elistinka.com/cambridgeaudio-azur650r.html

Christie 38-809051-51

Christie Standard Lens for LX41/45/50 - 38-809051-51

Product Description

1.8-2.4:1 Zoom Lens This lens provides a 1.8-2.4:1 throw ratio for any of the Christie LCD projectors listed below. This means that the distance between the projector and the screen (throw distance) can be approximately 1.8-2.4 x the width of the projected image (screen). Can be used with: Christie LX650.

Throw Distance: 1.8-2.3 : 1
Focal Length: 48.4-62.8mm
Lens Shift: 10:0 - 1:1
F Value: 1.8 - 2.1
Image Circle: 46.4mm
Max. Diameter: 81.6mm
Length: 152.6mm.

http://www.elistinka.com/christie-3880905151.html

Crown CDI-4000

Product Description

Crown CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes three models which are identical except for output power: CDi 1000, CDi 2000, and CDi 4000. All are rugged and lightweight, and offer unmatched value in their class.

* Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. * Switch-mode universal power supply. * Intuitive front-panel LCD screen for quick, easy configuration. * Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. * Up to 20 user defined DSP presets are available. Specifications Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A At idle: Draws no more than 45 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Dual Bridge mono 2–8 ohms 4–16 ohms Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB Sensitivity (at 8 ohm rated output) 1.4V Maximum Input Signal +22 dBu typical Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D.

http://www.elistinka.com/crown-cdi4000.html

Denon AVR-990

Product Description

120 WATTS x 7 Channels Assignable Digital Inputs: Coaxial-2, Optical-2 Digital Outputs: Optical-1 Analog Audio Inputs: 8 Incl. Tuner, Sirius Radio Analog Record Outputs-2 Front Panel A/V Inputs: Composite and S-Video Video Conversion – Analog to HDMI Composite Video Inputs-4 Incl. Front Composite Video Outputs-2 Incl. Monitor Component Video Outputs-1

HDMI Upconverting 480p 720p 1080i 1080p HDMI 1.3a Inputs-4 HDMI 1.3a Outputs-1 Source Function Renaming Front A/B Speaker Selector Sirius Ready IR Serial Remote In/Out terminals Multi-Source/Multi-Zone iPod Dock Control Port Pre Labled Assignable Digital Inputs

Input Delete Function HDMI Audio/Video Repeater Function HDMI Deep Color Support-36Bit HDMI xvYCC Color Space Support Dolby Digital Plus Dolby Digital Surround EX Decoding Dolby Digital Pro Logic II dts ES Discrete 6.1 Decoding

Dimensions (WxHxD) 17.1"x6.75"x14.9".

http://www.elistinka.com/denon-avr990.html

KEF iQ90

Product Description

Design Three-way bass reflex Drive Units 2 x 165mm (6.5in.) LF, 165mm (6.5in.) Uni-Q, 19mm (0.75in.) aluminium dome HF Crossover Frequencies 180Hz, 2.5kHz Amplifier Requirements 15-200W Magnetic Shielding Yes Frequency Range 33Hz - 40kHz Plinth Dimensions (H x W x D) 28 x 288 x 348 mm (1.1 x 11.3 x 13.7 in.) Sensitivity (2.83V/1m) 91dB Maximum Output 113dB Input Impedance 8 Ohms.

http://www.elistinka.com/kef-iq90.html

Monitor Audio CPWBR

Monitor Audio CPW BR

Monitor Audio CP In-Wall Series In-Wall Speaker - CPW BR

Product Description

Frequency Response: 62 Hz - 22 KHz Impedance (Nominal): 8 Ohms Sensitivity (1W@1M): 88 dB Maximum SPL: 105 dBA Power Handling: 80 W Amp Requirements: 20 - 80 W Bass Alignment: Sealed Enclosure Drive Unit Complement Bass: 1 x 6.5" MMP®II second generation metal matrix polymer Drive Unit Complement Tweeter: 1” (25 mm) C-CAM® gold dome with rare earth magnet Overall Diameter / Size: (H x W) 423 mm x 270 mm (16 11/16 inch x 10 11/16 inch) Overall Depth: 100 mm (3 15/16 inch) Cut-Out Hole Diameter / Size: (H x W) 387 mm x 234 mm (15 1/4 inch x 9 1/4 inch) Mounting Depth: 95 mm (3 15/16 inch).

http://www.elistinka.com/monitoraudio-cpwbr.html

Niles CM730DS

Niles 7" Two-Way Loudspeakers with Pivoting Woofer & Tweeter - CM730DS (Pair)

Product Description

* Recommended Amplifier Power: 10 To 125 Watts * Frequency Response: 55Hz To 21kHz +/-3dB * Impedance: 8 Ohm Nominal; 6 Ohm Minimum * Frame Dimensions: 11" (28 Cm) Diameter * Hole Cutout Dimensions: 9-3/4" (25 Cm) Diameter * Depth Behind Ceiling: 5-7/8" (15 Cm).

http://www.elistinka.com/niles-cm730ds.html

Sonance S621R TL

Product Description

Tweeter 3/4" (19mm) silk dome, ferrofluid cooled
Woofer 6 1/2" (165mm) polypropylene cone, rubber surround
Frequency Response 50Hz-20kHz ±3dB
Impedance 8 ohms nominal; 6 ohms minimum
Power Handling 5 watts minimum; 100 watts maximum
Sensitivity 88dB (2.83V/1 meter)
Grille Perforated aluminum
Dimensions (Diameter x Depth) 9 3/4" x 3" (248mm x 76mm)
Cut-Out Dimensions (Diameter) 8 1/4" (210mm).

http://www.elistinka.com/sonance-s621rtl.html

Sherwood R-903

Sherwood TruDigital™ 6.1 A/V Receiver - R-903

Product Description

100 Watts x 6 (Surround Modes) - Equibit TruDigital™ Amplifier for all Channels - DTS-ES Discrete and Matrix - Dolby Digital Surround EX - DTS Neo-6 - Dolby Pro Logic II; Movie and Music - Dolby Virtual - 19 DSP Modes - 2 Optical Digital Inputs - Coaxial Digital Input - Optical Digital Input - On-Screen Display - Preprogrammed 8-unit Remote Control with Macro Capability Trinnov Features | Amplifie | Audio/Video | Tuner | General | Specifications - Frequency Response: 20 Hz to 22 kHz - S/N Ratio (IHF at rated power) > 95 dB - IMD: <0.10% - Power output (4 ohms) 120 W x 2 - Adjustable Crossover frequency : 80 Hz, 100 Hz, 120 Hz Trinnov Features | Amplifie | Audio/Video | Tuner | General | Specifications - Crystal Semi-conductor CS-49326 24-bit digital processor - Subwoofer Preamp output - 3 Rear Panel Audio/Video Inputs (including S-Video) - 3 Audio Inputs (including built-in tuner) - 2 Video Outputs with "S" and Composite Video (Monitor, VCR) - Rear Channel amp assignable to subwoofer - Tone Controls - Cinema EQ - Tone Direct - Pink Noise Generator for Surround Sound Balancing - Dynamic Range Control - Audio Input balance Trinnov Features | Amplifie | Audio/Video | Tuner | General | Specifications - Advanced AM/FM Tuner - 4-Gang FM Front end - Preset Scan - 30 Station Presets (random) Trinnov Features | Amplifie | Audio/Video | Tuner | General | Specifications - Headphone Jack - Digital Encoder Volume Control - 24K Gold Plated Input/Output Jacks Trinnov Features | Amplifie | Audio/Video | Tuner | General | Specifications Amplifier Section Power Output, Stereo Mode (20Hz-20kHz) 8 ohms 100 W x 2 THD @ Rated Output 0.20% IM Distortion @ Rated Output 0.10% Power Output, Srrnd Mode, L/C/R; 1 kHz; 8 ohms 100 W x 3 Rear; 1 kHz, 8 ohms 100 W x 3 All channels driven, 20 Hz-20kHz, @ 8 ohms - All channels driven, 20 Hz-20kHz, @ 4 ohms - Input Sensitivity/Impedance Phono (MM, 47 k ohms) / Line (CD, Tape, Video @ 47 k ohms) - / 200 mV Phono Overload (1 kHz, 0.5 THD) (MM) - Signal-to-Noise Ratio : Phono (MM) / Line (CD, Tape, Video) - / 95 dB Tone Controls : Bass Left & Right Front (100 Hz) / Treble Left & Right Front (10 kHz) ± 10 dB / ± 10 dB Cinema EQ (-1.8 dB @ 1 kHz, -4.5 dB @ 10 kHz) Yes Frequency Response : Phono (20 Hz-20 kHz, RIAA) / Line (CD, Tape, Video) -3 dB / Subwoofer (High Pass; Hz/Low Pass; Hz) - / 10 Hz-22 kHz / 80/100/120 Output Level (Tape Rec) Level/loop 180mV, 2.2k Video Section Input Sensitivity/Impedance 1V p-p/ 75 Ohms Output Level/Impedance 1V p-p/ 75 Ohms Frequency Response (5 Hz to 100 MHz) - FM Tuner Section Usable Sensitivity (Mono) 12.8 dBf 50 dB Quieting Sensitivity (Mono/Stereo) 20.8 dBf/41.2 dBf Signal-to-Noise Ratio @65dBf, Mono/Stereo 72 dB/68 dB THD @ 65 dBf, 1 kHz, Mono/Stereo 0.2/0.4 Frequency Response (30 Hz-15 kHz) ±1 dB Stereo Separation (1kHz) 45 dB Capture Ratio 1.25 dB AM Suppression 60 dB Selectivity, Alternate Channel @ 98 MHz, 400 Hz) 65 dB Image Rejection Ratio 40 dB IF Rejection Ratio 70 dB Spurious Rejection Ratio 70 dB AM Tuner Section Usable Sensitivity 500 uV/m Signal-to-Noise Ratio 46 dB Total Harmonic Distortion <1% Selectivity/Image Rejection 25 dB/33 dB Frequency Response (+0, -6 dB) 80 Hz-2.3 kHz.

http://www.elistinka.com/sherwood-r903.html

Speaker Craft AIM LCR Five

Speaker Craft Aim LCR Five

Product Description

* Pivoting Woofer Baffle * Two 51/4" Kevlar Cone Woofers with Phase Plugs * Pivoting 1" Aluminum/Magnesium Dome Tweeter * Front-Mounted Switches Allow for up to ±3dB of Bass and Treble Adjustment * Timbre-Matched to All Five Series Speakers * Sensitivity: 91dB 1W/1m * Power Handling: 100 Watts * Impedance: 8/6 Ohms, Depending on Switch Settings * Frequency Response: 48Hz - 20kHz * Dimensions: (H x W x D) 91/4" x 177/16"x 4" (235 mm x 443 mm x 102 mm) * Wall Cut-Out: (H x W) 71/2" x 141/4" (190 mm x 362 mm).

http://www.elistinka.com/speakercraft-aimlcr5.html

Universal Remote PSX-2

Universal Remote Personal Server with TV on screen control - PSX-2

Product Description

Specifications

* Size: 6.75” x 5” x 1.6” (W x D x H) * Memory: Microcontroller: 166MHz ARM922T Flash memory: 16Megabit RAM: 64Megabit SDRAM * Range: IR (line of sight) -20-30’ depending on the environment. * IR Flasher: Rear Panel IR Input: Compatible with all Complete Control MRF and MSC base stations * Network: 10Base-T/100Base-TX network connector * Video: 3 RCA Component video output connectors (Y/Pr/Pb) * Audio: 2 RCA audio output connectors (L + R).

http://www.elistinka.com/urc-psx2.html

Yamaha RX-V765

Yamaha 7.2-Channel Digital Home Theater Receiver - RX-V765

Product Description

Specifications * New SCENE buttons (BD/DVD, TV, CD and Radio) - quick and simple to use * YPAO sound optimization for automatic speaker setup * XM ready with XM HD Surround powered by Neural Surround * SIRIUS Satellite Radio ready * iPod compatibility via optional YDS-11 Universal Dock * Bluetooth (A2DP) compatibility with optional Yamaha Bluetooth® Wireless Audio Receiver YBA-10 * On-screen display * Front panel mini jack for connecting portable audio player * Dialogue Lift * iPod song titles displayed in English and Western European languages on the front panel and on-screen display * HDMI CEC functionality * Initial Volume Setting and Maximum Volume Setting * Preset remote unit * Analog video upscaling to full HD 1080p * 1080p-compatible HDMI (4 in/1 out) * Supports Deep Color (30/36 bit), x.v.Color, 120Hz/24Hz Refresh Rates and Auto Lip-Sync compensation * 7-channel 665W powerful surround sound (95W x 7) * Decoders for HD audio formats: Dolby TrueHD and DTS-HD Master Audio; Dolby Digital Plus and DTS-HD High Resolution Audio * Discrete amp configuration * Digital ToP-ART and High Current Amplification * Pure Direct * Burr-Brown 192 kHz/24-bit DACs for all channels * Intelligent Assignable amplifiers for bi-amp or Surround Back <-> Front Presence or Zone 2 connection * CINEMA DSP 3D (17 DSP programs) with Adaptive DSP Level * Adaptive DRC (Dynamic Range Control) * Compressed Music Enhancer * SILENT CINEMA and Virtual CINEMA DSP * Audio Delay for adjusting Lip-Sync (0-240 ms)

* Zone 2 on/off and control on front panel * Remote input/output * Programmable +12V trigger output Channels 7 RMS Output Power (20Hz - 20kHz) 95W x 7 Total Power (20Hz - 20kHz) 665W Dolby TrueHD • Dolby Digital EX/ Dolby Pro Logic IIx • DTS-HD Master Audio • DTS-ES Discrete 6.1 • DTS 96/24 / DTS Neo:6 • Pure Direct • iPod Compatibility • (With Optional YDS-11) Bluetooth Compatibility • (With Optional YBA-10) Compressed Music Enhancer • Neural Surround • XM HD Surround • Sirius Satellite Radio Ready • XM Satellite Radio Ready • HDMI (In/Out) (4 / 1) Component Video (In/Out) (2 / 1) A/V Inputs (S-Video) 4 (Composite) Digital Inputs/Outputs [O: Optical, C: Coaxial] (O: 2, C: 2) Front A/V with Digital Input • (A/V Only) Front Mini Input for Portables • D/A Conversion 192 kHz / 24 bit Surround Programs 17 Time Base Corrector • HDMI Standby-through • Analog Video to HDMI Upconversion • (with upscaling up to 1080p) Dialogue Lift • YPAO (w/Optimizer Microphone) • On-Screen Display (OSD) • Assignable Power Amp • Zone Speaker Terminals • Zone 2 Output • (Audio Only) Zone Power Switching • Main/ Zone2 (Front Panel) +12V Trigger Output • IR Inputs/Outputs • Selectable Subwoofer Crossover • Multi-Channel Decoder Inputs 8-Channel Pre-Out All Channels • Learning Remote Capability Preset.

http://www.elistinka.com/yamaha-rxv765.html